Archem PRS Grade 2500R Coated Industrial Coating

 

Archem PRS 2500R industrial coating is a starch based anti set off powder, designed for today’s high speed modern Presses to prevent Ink set off in the stack when printing on 250gsm to 400gsm substrates. The quoted stock gsm range for this specific grade of industrial coating is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder.

Industrial Coating Technical specification

  • Appearance Dry white powder.
  • Materials content Vegetable starch.
  • Average granule diameter 25μ (microns).
  • Moisture 11% – 14% (Certificate of Analysis available)
  • Hydrophobic characteristics Positive(hydrophobic)
  • Spray and Flow rate Good

Product Benefits

  • Coated (hydrophobic) moisture resistant spray powder.
  • Narrow particle range
  • Reduced Plate wear and piling on the Printing Blankets.
  • Designed for use on Straight through or Long Perfect Presses.
  • Uniform spray pattern.
  • Highly controllable flow rate giving reduced machine settings.
  • Biodegradable.

Directions for use

Suitable for all Sheetfed lithographic printing – single pass, multiple pass work and in conjunction with Water-based industrial Coatings. Always apply the minimum amount of spray powder required to prevent set off. Archem PRS anti-set off spray powders are developed for use in all types of spray powder applicators. Should be stored at room temperature in dry conditions, containers should be resealed after use to prevent the powder becoming damp or contaminated.

Packaging

1 kg 10 Kg
2.5 kg 25 Kg
3 kg 30 Kg
20 kg 200 Kg